This is a 3D seismic survey operation.

You will recieve a permit request letter. On the back of your permit request letter there will be a plat map hi-lighting your property. We would like to drill shot holes along the red lines and lay cables or receivers along the blue lines.

When we record the sound or echo's from the shots we will pick up the cables and be gone.  

In a nut shell here is how it works.

This is a 3D seismic survey. The red dots on the map are where we would like to drill shot holes. They are 60 feet deep and plugged when completed. The blue dots represent the cables or receiver lines and they will be on top of the ground. This all takes several months but the cables are most visible because they will be in place for about 4 weeks.

When possible we deliver these request letters, in person, so we can explain the operations to you. 

Here is about how it takes place.

The permit agents are here now securing permission from all of the land owners.

The surveyors will come in early 2009. They will only be on your property 1 or 2 days.  What specific day just depends on how they get to it.

The drills will arrive a few weeks after the surveyors and if there are holes to be drilled they may be on your property as the surveyors were, 1 or 2 days. Then a couple months will pass before the recorders arrive. When they lay the cables/ receivers out, they will be in place for about 4 weeks. Then they are picked up and the survey is done.

That's about it

.

If you have any questions there will be a number to call.

Regards

AT LARGE PERMIT SERVICES
Fax 425-871-5792